Table saws are a significant source of injuries in the United States and other countries. The SawStop table saw was developed to prevent operators from having their fingers cut off. This safety system stops and lowers the saw blade when it encounters human flesh.
How does the SawStop knows when to stop
The saw blade teeth carry a small electrical current. When the blade encounters human flesh, the natural conductivity of a human hand or finger changes this electrical current. The safety system detects this change in electrical current and activates the safety system. Thus, the saw blade will only remove a small slice of skin before it is stopped.
The table saw has a bypass mode that allows it to cut conductive materials, such as metal and wet wood. This mode is deactivated when the saw motor is shut off. However, the operator should check the blade for any remnants of these conductive materials before operating the saw again.
The operator can use the bypass mode to determine if a particular material would have caused the safety system to activate under the normal mode. However, after any testing session has been completed, the saw motor should be shut off.
How the saw blade is stopped and lowered
Activation of the safety system causes the following actions:
• An aluminum brake is forced into the spinning blade, causing it to stop.
• The angular momentum resulting from the blade being stopped forces the blade under the cutting table.
• The electrical power to the saw motor is disconnected.
Actions after the saw blade has been stopped
The operator has to remove and replace the damaged saw blade and aluminum brake. If a replacement blade and brake are on hand, this action should only take about five minutes or so. Most table saw operators won’t encounter this stoppage. However, operators with a busy workload should keep a replacement saw blade and aluminum brake on hand so production won’t be stopped.
Video of a SawStop in action
The following website has a video showing the operation of a SawStop table saw.
• Fine Wood Working
Types of SawStop table saws available
Presently there are four types of these table saws available for purchase. These types range from an industrial cabinet saw at the high-end to a portable contractor saw at the low-end. Each type of saw is available in a range of prices, depending on the power of the saw motor and other features.
Future of the SawStop table saws
These table saws have been accepted by the market even though they are priced at the high-end. They are recognized as high-quality table saws. However, a potential competitor has developed a different type of safety device. The Whirlwind Tool Company claims that its prototype device can stop the saw blade before it encounters human flesh.
Another potential problem is that the US government may eventually enforce some type of safety features on table saws. If this happens, SawStop may be able to license its safety system to other manufacturers of table saws.
Therefore, the future of SawStop may not be known until more time passes and the various uncertainties have been resolved.